With a crane, the tree does not have to fall, but is lifted from the area vertically, piece by piece, and moved to a drop zone. In that safe place away from the crane, ground personnel cut the wood to smaller sizes for transport and pass the branches through a chipper to use it as mulch. For some tree removals, a trained climber can climb up the tree that needs to be removed. Then the climber will carefully cut sections of the tree and drop them or guide them to the ground with ropes.
For example, pruning or removing trees in tight areas, such as between two houses. Often, between houses there is a narrow area, and trees in that area need to be kept at a certain size or even removed if they become too large or need to be replaced. Cutting down trees in the traditional way could put at risk the houses on either side of them, as well as the other trees that surround them. With the help of a crane, the arborist can make the necessary cuts, at the same time securing any part of the tree that he has removed.
The crane then lifts the excised branch or the entire tree in some cases and removes it from the property safely without putting any of the surroundings at risk. If necessary, they repeat this process as many times as necessary until the job is finished. A tree service crane is one of the many specialized equipment that an arborist company must have on hand. Other trees may have been damaged by wind or storms and are equally unsafe for a climber, as they can break during the tree removal process.
It is not the same as fixed cranes used for construction; tree cranes are mounted on large trucks. While the hooking and cutting process is underway, it is essential to know the limits of the crane during this process, as overloading the crane can cause a disaster. It does not always mean that the cost of tree removal will be more expensive, as it significantly speeds up the process of removing trees. I say most of the cases, since some tree removal companies own a crane and use it to speed up the work and complete it at a lower cost.
Once the location of the crane is decided, the crane is introduced and positioned with the boom normally facing the tree. You may have a medium-sized tree, but you need a large reach to remove it, so you need a large crane. They are responsible for keeping trees healthy, dealing with diseases and pests, and eliminating trees, branches and stumps. When the crown is removed from the tree, the climber must go back down the trunk of the tree, removing portions as he progresses.
Crane-assisted tree removal is necessary when a tree is in a hard-to-get place, or if it is difficult to extract trees due to the size or shape of the tree and traditional methods are not enough. Tree removal is a dangerous and laborious project, but in some cases, the use of a crane can make the process more efficient. They require complex rigging and descents to avoid obstacles and generally have lower results compared to the crane-assisted tree harvesting process. Next, the crane operator and tree climber will analyze exactly how they intend to remove the tree.
